Slim Ceiling Fan Coil Unit 200–600: Technical Specifications and Key Features Introduction to the Cyperus Slim Ceiling Fan Coil Unit Choosing the right heating and cooling system is an important part of designing residential, commercial, and office buildings. In projects where ceiling space is limited, a slim ceiling fan coil unit can provide a practical solution for indoor climate control. Its compact design makes it suitable for applications where the available height above a suspended ceiling is a major consideration. The Cyperus slim ceiling fan coil unit, manufactured by Ideh Pardazan Nakhl Mordab, is designed with a focus on compact dimensions, low-noise operation, and modern control capabilities. Its main announced features include a height of just 130 mm, a DC motor, a washable filter, a durable galvanized body, and compatibility with the dedicated Cyperus application and Cyperus wall thermostat. For customers comparing models in the 200–600 range, it is important to consider more than the unit's physical dimensions. Cooling and heating capacities, airflow rates, static pressure, noise levels, and electrical specifications should also be evaluated to determine the most suitable model for each project. Technical Specifications of the Cyperus Slim Ceiling Fan Coil Unit The following table summarizes the available product information. Exact numerical performance data for individual models should be verified using the manufacturer's official technical catalogue. Specification Description Product Type Slim Ceiling Fan Coil Unit Model Range 200–600 Unit Height 130 mm Motor Type DC motor Noise Performance Designed for low-noise operation Control System Compatible with the dedicated Cyperus application Wall Thermostat Compatible with the Cyperus wall thermostat Air Filter Washable filter Cabinet Material Durable galvanized metal Main Design Advantage Space-saving installation Manufacturer Ideh Pardazan Nakhl Mordab Brand Cyperus Technical note: Exact cooling and heating capacities, airflow rates, external static pressure, overall length and width, power consumption, and sound levels were not provided in the available product information. These values should be obtained from the official catalogue for each model before making a final technical or purchasing decision. Key Advantages of the Cyperus Slim Ceiling Fan Coil Unit 1. Compact Design with a Height of 130 mm One of the most notable features of the Cyperus slim ceiling fan coil unit is its 130 mm height. This compact profile can help address installation challenges in buildings with limited ceiling voids. In residential developments, offices, hotels, and commercial properties, HVAC equipment must be coordinated carefully with architectural design. A low-profile fan coil can help optimize available ceiling space, provided that sufficient room is also allocated for piping, condensate drainage, connections, and maintenance access. 2. DC Motor and Low-Noise Operation The unit is equipped with a DC motor, one of its key advertised technical features. Motor technology, fan design, and speed control can influence operating performance and electricity consumption. Noise is another important consideration when selecting fan coil units for bedrooms, meeting rooms, offices, and other noise-sensitive environments. For an accurate comparison between models, buyers should review the manufacturer's measured sound levels at different operating speeds under comparable test conditions. 3. Compatibility with the Cyperus Application The Cyperus slim ceiling fan coil unit supports connection to the dedicated Cyperus application. This feature is intended to provide a more convenient way to manage the unit's settings. Before installation, users should confirm application compatibility, connection requirements, available control functions, and any additional equipment needed for operation. 4. Compatibility with a Cyperus Wall Thermostat The unit is designed to work with a Cyperus wall thermostat, allowing users to manage indoor temperature settings through a wall-mounted control interface. For successful integration, the thermostat model, wiring requirements, and control compatibility should be confirmed during the system design stage. This is particularly important in projects with multiple fan coil units serving different rooms or zones. 5. Washable Air Filter The washable filter allows routine cleaning and reuse, helping simplify regular maintenance. Keeping the filter clean can support appropriate airflow and help maintain the unit's operating performance. Cleaning frequency depends on indoor air quality, dust levels, operating hours, and the manufacturer's maintenance recommendations. The filter should be cleaned and dried according to the product instructions before being reinstalled. 6. Durable Galvanized Metal Cabinet The unit features a galvanized metal cabinet designed to provide a robust enclosure for its internal components. Cabinet construction is an important consideration for HVAC equipment that must remain accessible for servicing throughout its operating life. For a complete assessment of durability, buyers should also consider insulation quality, component assembly, drainage design, installation conditions, and the manufacturer's maintenance guidelines. How to Choose the Right Fan Coil Model from 200 to 600 Selecting a fan coil unit based only on its model number or external dimensions is not sufficient. The appropriate unit must match the heating and cooling requirements of the space. Before purchasing, consider the following factors: Cooling and heating load: Determine the required capacity through appropriate thermal load calculations. Airflow rate: Ensure that the unit can deliver the required airflow for the room layout and intended application. Installation dimensions: Check the 130 mm unit height and allow additional space for connections, drainage, and servicing. Noise level: Review the sound ratings at different fan speeds, especially for quiet environments. Electrical consumption: Check the motor's power requirements and the total electrical specifications of the unit. Control compatibility: Confirm compatibility with the Cyperus application and wall thermostat. Maintenance access: Ensure that filters and service components can be accessed after the ceiling is completed. Comparing these factors with the project's design requirements can help prevent installation problems and improve the suitability of the selected equipment. About Ideh Pardazan Nakhl Mordab After several years of continuous activity and applied research in the building industry, Ideh Pardazan Nakhl Mordab decided in 2019 to establish a production line for specialized, modern heating and cooling products. The company's objective is to develop practical products that contribute to the advancement of the building and HVAC industries. The Cyperus slim ceiling fan coil unit is presented as part of this approach, combining a low-profile design with modern control capabilities. According to the company information provided, representatives are available in the following Iranian cities: Isfahan Mashhad Tehran Zanjan Urmia Sari For information about model availability, technical specifications, purchasing, and regional representation, customers can contact the company or the relevant representative. Cyperus — Being Different Is a Choice. Frequently Asked Questions 1. What is the height of the Cyperus slim ceiling fan coil unit? The announced unit height is 130 mm. However, the total installation space must also account for piping, condensate drainage, connections, and maintenance access. 2. What are the main features of the Cyperus fan coil unit? Its advertised features include a DC motor, a slim 130 mm design, low-noise operation, a washable filter, a galvanized metal cabinet, and compatibility with the Cyperus application and wall thermostat. 3. How can I select the right fan coil capacity? The appropriate capacity should be determined based on heating and cooling load calculations, climate conditions, room dimensions, building use, and the performance specifications of the selected unit. 4. Are the technical specifications identical across models 200–600? Not necessarily. Cooling and heating capacity, airflow, power consumption, dimensions, and other performance characteristics may differ between models. The official technical catalogue should be consulted for accurate comparisons. 5. Where are Cyperus representatives located? According to the supplied company information, representatives are available in Isfahan, Mashhad, Tehran, Zanjan, Urmia, and Sari, Iran. Contact the company for current contact details and regional sales information. Conclusion The Cyperus slim ceiling fan coil unit is designed for projects that require compact HVAC equipment and convenient control options. Its 130 mm height, DC motor, washable filter, galvanized cabinet, and compatibility with the dedicated application and wall thermostat are among its key advertised features. When comparing models in the 200–600 range, verify each unit's cooling and heating capacity, airflow rate, static pressure, noise level, and electrical consumption against the project's actual requirements. Consulting the official technical documentation can help ensure an appropriate selection. For consultation and inquiries, please contact us. For more information and free consultation, you can contact us. free consultation.