Slim Ceiling Fan Coil Unit: A Practical Solution for Modern Buildings Choosing the right heating and cooling equipment is essential for maintaining indoor comfort and making efficient use of available space. In buildings with limited clearance above suspended ceilings, the dimensions of HVAC equipment can be a major factor in the selection process. A slim ceiling fan coil unit with a stated height of 130 mm is designed for projects where installation space is limited and a compact unit is required. Idea Pardazan Nakhl Mordab entered the specialized heating and cooling equipment manufacturing sector in 2019, following several years of continuous activity and applied research in the construction industry. The company's goal is to develop modern, practical products that address the needs of the building and HVAC industries. This slim ceiling fan coil unit is presented with several features, including a DC motor, low-noise operation, a galvanized steel body, a washable filter, and connectivity with Cyperus control solutions. These features may be relevant to residential, commercial, and office projects where compact dimensions and convenient control are important. Before purchasing a fan coil unit, it is advisable to review its technical specifications, installation requirements, and compatibility with the building's heating and cooling system. What Are the Advantages of a 130 mm High Ceiling Fan Coil Unit? One of the main stated features of this model is its 130 mm height. In modern buildings, the space above suspended ceilings may be limited by lighting systems, structural elements, pipes, and other mechanical services. Compact HVAC equipment can help designers plan installations more efficiently when available space is restricted. The slim design makes this model worth considering for projects where ceiling clearance is an important requirement. However, the unit's height alone is not enough to determine whether it will fit a particular installation. Before ordering, check the complete dimensions, pipe connections, duct connections, electrical connections, and service access requirements. Sufficient clearance should also be provided for filter cleaning, inspection, and maintenance. Considering these factors during the design stage can help reduce installation difficulties and make future servicing easier. Main Features of the Slim Ceiling Fan Coil Unit 1. DC Motor and Low-Noise Operation The DC motor is one of the main features specified for this ceiling fan coil unit. Motor type and control technology can influence fan speed regulation and the way the unit operates. Low-noise performance is particularly important in bedrooms, offices, hotels, and other spaces where acoustic comfort matters. However, actual noise levels depend on operating speed, installation quality, vibration, airflow conditions, and the design of the air distribution system. For an accurate comparison, request the manufacturer's sound-level data at different fan speeds. This information can help determine whether the unit is suitable for the intended environment. 2. Compatibility with the Cyperus Mobile Application According to the supplied product information, the unit supports connection to the dedicated Cyperus application. App-based control can make it more convenient to manage HVAC equipment, depending on the functions supported by the system. Before purchasing, confirm the available control features, connection method, additional hardware requirements, and compatibility with the specific model. These details are especially important when integrating the fan coil unit into a building automation or smart-control system. 3. Connection to a Cyperus Wall Thermostat The unit is also specified as compatible with a Cyperus wall thermostat. A thermostat helps regulate indoor temperature and control the HVAC system according to the selected settings. For a successful installation, the thermostat location, wiring requirements, control method, and compatibility with the selected fan coil model should be determined in advance. Planning these details before installation can help avoid unnecessary modifications and improve the usability of the finished system. 4. Washable Filter A washable filter is another stated feature of this model. The filter captures some airborne particles moving through the unit, making regular cleaning an important part of routine maintenance. The cleaning frequency and method should follow the manufacturer's instructions. A dirty filter can restrict airflow and affect the unit's operating performance. It is also important to understand that a standard fan coil filter is not necessarily equivalent to a dedicated air purification system. Buyers should evaluate filtration requirements according to the needs of the building. 5. Durable Galvanized Steel Body The manufacturer identifies the galvanized steel body as another feature of this fan coil unit. The construction material is relevant to the equipment's physical strength and suitability for its intended installation environment. For a more complete technical assessment, buyers can request additional information about sheet thickness, casing construction, internal insulation, and maintenance requirements. Reviewing these details can help project managers and HVAC contractors assess whether the unit meets the requirements of their installation. Slim Ceiling Fan Coil Unit Price The price of a ceiling fan coil unit depends on its technical specifications, capacity, configuration, and supply conditions. When comparing different models, it is important to consider more than the initial purchase price. Factors that may affect the final cost include: Cooling and heating capacity. Motor type and control system. Compatibility with thermostats and additional control devices. Unit dimensions and casing design. Accessories and included components. Transportation, installation, and commissioning costs. Warranty terms and spare-parts availability. The exact price of this model was not included in the available product information. To obtain the current price, available configurations, and ordering conditions, contact Idea Pardazan Nakhl Mordab or its representatives. For a meaningful price comparison, ensure that the products being compared have similar capacities, specifications, and included accessories. Choosing equipment based only on the lowest initial price may overlook important project requirements. How to Choose a Low-Noise Ceiling Fan Coil Unit Selecting a fan coil unit requires an understanding of the building's heating and cooling requirements. The following considerations can help buyers and contractors make a more informed decision. Determine the Required Capacity Room area alone is not sufficient to calculate the correct fan coil capacity. Ceiling height, occupancy, window size, solar heat gain, insulation, and local climate conditions can all influence the heating and cooling load. A professional load calculation is recommended to determine the appropriate cooling and heating capacity for the space. Check the Available Installation Space If the project has limited clearance above the suspended ceiling, the stated 130 mm height may be an important preliminary selection criterion. However, the full unit dimensions and required clearance for piping, electrical connections, ductwork, and maintenance must also be checked. Adequate service access should be incorporated into the ceiling design. Evaluate the Control Options The stated ability to connect to the Cyperus application and wall thermostat may be useful in projects that require convenient HVAC control. Before ordering, confirm which functions are supported, whether additional devices are required, and how the control system integrates with the building's existing equipment. Consider Maintenance Accessibility The installation should allow convenient access to the filter and other serviceable components. This is particularly important in commercial buildings and spaces where HVAC equipment operates for extended periods. Regular inspection and maintenance can help preserve normal airflow and identify potential issues before they become more serious. Idea Pardazan Nakhl Mordab Representatives Idea Pardazan Nakhl Mordab lists representatives in several Iranian cities. The locations provided by the company include: Isfahan Mashhad Tehran Zanjan Urmia Sari Customers can contact the company or the relevant representative to ask about technical specifications, current pricing, product availability, and supply conditions. Before visiting a representative in person, confirm the current address and contact details directly with the company. Why Should You Review Technical Specifications Before Buying? A fan coil unit is part of a building's overall heating and cooling system. Its selection should therefore consider more than the casing dimensions and control features. Important technical factors may include cooling and heating capacity, airflow rate, available external static pressure where applicable, water-side connection requirements, installation conditions, and compatibility with the wider HVAC system. For commercial and residential construction projects, it is advisable to have the equipment specifications reviewed by an HVAC designer or qualified installation professional. This can help reduce selection errors and ensure that the unit is appropriate for the intended application. The slim ceiling fan coil unit from Idea Pardazan Nakhl Mordab is presented with a stated height of 130 mm, a DC motor, a washable filter, a galvanized steel body, and connectivity with Cyperus control solutions. Full technical documentation should be reviewed before making a final purchasing decision. Frequently Asked Questions What is the height of the slim ceiling fan coil unit? The stated height of this model is 130 mm. Before installation, obtain the complete dimensional drawing and check the additional space required for connections and maintenance. Does the unit use a DC motor? Yes. A DC motor is listed among the product's specified features. For detailed information about motor operation, fan-speed control, and performance, request the manufacturer's technical documentation. Can the fan coil unit be controlled through a mobile application? According to the supplied information, the unit supports connection to the dedicated Cyperus application. The available functions, connection method, and any additional hardware requirements should be confirmed with the manufacturer. Can it connect to a wall thermostat? Yes. Connection to a Cyperus wall thermostat is listed as a supported feature. Check the compatibility of the control equipment and the electrical connection requirements before installation. How much does the slim ceiling fan coil unit cost? The current price was not provided in the available product information. Contact Idea Pardazan Nakhl Mordab or its representatives to confirm the price, available configurations, and ordering conditions. In which cities does the company have representatives? The listed cities are Isfahan, Mashhad, Tehran, Zanjan, Urmia, and Sari. Contact the company to confirm current representative details and locations. Request Pricing and Information About the Slim Ceiling Fan Coil Unit If you are selecting compact heating and cooling equipment for a residential, office, or commercial building, consider evaluating the slim ceiling fan coil unit with a DC motor from Idea Pardazan Nakhl Mordab. Its stated 130 mm height, washable filter, galvanized steel body, and compatibility with Cyperus control solutions are features worth reviewing when planning an HVAC installation. Before placing an order, determine the required capacity, verify the available installation space, and request the latest price, complete technical specifications, warranty terms, and service information. Taking these steps can help you select equipment that better matches your building's technical requirements and long-term operating needs. For more information and free consultation, you can contact us. free consultation.