What Determines the Price of a 130 mm Ceiling Fan Coil? When selecting heating and cooling equipment, price is only one part of the purchasing decision. Cooling and heating capacity, dimensions, motor type, control options, construction quality and installation requirements can all affect the actual value of a fan coil. A ceiling fan coil with a height of approximately 130 mm is designed for projects where the space above a suspended ceiling is limited. Its slim construction can help use the available installation space more efficiently while providing heating and cooling functions. However, the final equipment selection should be based on the actual requirements of the building, calculated thermal loads and the specifications of the complete HVAC system. What Projects Are Suitable for a 130 mm Ceiling Fan Coil? In many modern buildings, the space above a suspended ceiling is shared by several mechanical and electrical systems. Pipes, cables, ducts, lighting equipment and other building services all require adequate installation space. A low-profile fan coil can therefore be useful when efficient use of the ceiling area is an important part of the project design. This type of equipment can be considered for: Residential buildings and apartments Offices Hotels and accommodation facilities Commercial spaces Renovation projects Buildings with shallow suspended ceilings Projects where reducing equipment installation space is important The suitability of the unit should still be evaluated according to the required capacity and the actual conditions of the building. Specifications of the Slim Ceiling Fan Coil One of the main features of this product is the combination of a compact design with modern control and maintenance capabilities. Specification Description Product type Slim ceiling fan coil Height Approximately 130 mm Motor DC Design Slim and low-profile Operation Low-noise design Filter Washable Housing Strong galvanized body Control Compatible with Cyperus application Thermostat Compatible with Cyperus wall thermostat Application Heating and cooling This combination of specifications makes the product relevant not only because of its compact dimensions but also because of its control and maintenance features. Why Is a 130 mm Height Important? Equipment dimensions are particularly important when designing ceiling-based HVAC systems. Some buildings have limited space between the structural ceiling and the suspended ceiling. A fan coil with a height of approximately 130 mm can occupy less vertical space. This can be particularly useful in projects where preserving the maximum possible room height is important. However, the installation plan should not be based only on the height of the unit. Space for piping, electrical connections, maintenance and filter access should also be considered before installation. How Does a DC Motor Affect Fan Coil Performance? The motor is one of the main components of a fan coil and is responsible for moving air through the heat exchanger. A DC motor can provide more flexible fan speed control. This allows the airflow to be adjusted according to the operating requirements of the space. Fan speed can affect airflow, operating noise and indoor comfort. Flexible speed control can therefore be useful when different operating conditions are required. However, the motor should not be evaluated separately. The fan design, controller, heat exchanger, construction quality and installation conditions also influence the final performance of the unit. What Are the Benefits of Low-Noise Operation? Noise is an important consideration in spaces where people spend significant amounts of time. Bedrooms, offices, hotels, healthcare facilities and educational environments may all require careful attention to HVAC noise. The slim ceiling fan coil is designed with a focus on low-noise operation, making this feature relevant for projects where acoustic comfort is important. Actual noise performance, however, depends on more than the equipment itself. Fan speed, installation quality, vibration, maintenance and system configuration can all affect the sound level experienced inside the room. For this reason, professional installation is just as important as the technical design of the fan coil. Why Is a Washable Filter Important? The filter is an important part of a fan coil system. It is positioned in the airflow path and helps reduce the amount of dust and other particles entering the system. A washable filter makes routine maintenance more convenient. According to the appropriate maintenance instructions, the filter can be inspected and cleaned periodically. A dirty filter may reduce airflow and increase the operating load on the system. Regular maintenance should therefore be considered an essential part of fan coil operation. Cyperus Application Connectivity One of the notable features of this fan coil is its ability to connect to the dedicated Cyperus application. Depending on the system configuration, app connectivity can make equipment management more convenient and provide additional control options. The unit can also be connected to a Cyperus wall thermostat. This can provide greater flexibility for projects where local wall-based control is preferred. The exact control functions should be confirmed according to the selected model and the control equipment used with the system. Main Benefits of a 130 mm Ceiling Fan Coil If installation space is limited, a low-profile fan coil can provide several practical benefits. The main advantages include: Low height suitable for restricted suspended ceiling spaces Slim design for more efficient use of installation areas DC motor technology Low-noise design Washable filter Strong galvanized housing Compatibility with the Cyperus application Compatibility with the Cyperus wall thermostat Suitability for different types of building projects These features allow the equipment to be evaluated from both a space-saving and operational perspective. Slim Fan Coil vs. Higher Ceiling Fan Coil Models Choosing between a slim fan coil and a larger model should depend on the specific requirements of the project. Neither option can be considered universally better without reviewing the technical specifications. Criterion 130 mm Fan Coil Higher Fan Coil Models Required vertical space Less More Suspended ceiling limitations Generally fewer May create restrictions Installation space management Easier in some projects Requires more space Maintenance access Requires suitable access planning Depends on installation Capacity Model dependent Model dependent Application Various projects Various projects The main advantage of the low-profile design is its reduced installation height. However, the required cooling and heating capacity should remain a primary selection criterion. What Should You Consider Before Buying a Ceiling Fan Coil? If you are planning to purchase a ceiling fan coil directly, several technical factors should be reviewed before placing an order. 1. Cooling and Heating Capacity The capacity should match the calculated thermal and cooling load of the building. Selecting equipment with insufficient capacity may affect comfort and system performance. 2. Installation Space Measure the distance between the structural ceiling and suspended ceiling. In addition to the unit height, allow enough room for pipes, electrical connections and future maintenance. 3. Noise Level If the unit is intended for a bedroom, hotel, office or another quiet environment, acoustic performance should be carefully considered. 4. Control System Check which thermostats and control systems are supported by the selected fan coil before finalizing the purchase. 5. Maintenance Requirements The unit should be installed in a location that allows technicians to access the filter and other important components when servicing is required. Common Mistakes When Buying a Ceiling Fan Coil One common mistake is making a purchasing decision based only on price. Two visually similar fan coils may have significant differences in capacity, motor technology, control functions and construction quality. Another common mistake is selecting a unit solely according to room size. Climate conditions, number of windows, ceiling height, insulation, room usage and occupancy can all affect the required capacity. Maintenance access is another factor that should not be overlooked. Installing the fan coil in a completely enclosed area without a suitable service opening can make future maintenance unnecessarily difficult. How Is the Price of a 130 mm Ceiling Fan Coil Determined? The price of a ceiling fan coil depends on several factors. Capacity is one of the most important considerations, but it is not the only factor affecting the final cost. Motor technology, control capabilities, housing quality, filter design, construction and market conditions can also influence the final price. For this reason, different models should ideally be compared at similar capacities and with comparable technical specifications. This provides a more accurate understanding of the actual value of each option. What Are the Benefits of Buying Directly From the Manufacturer? Direct purchasing can simplify communication with the manufacturer and make it easier to obtain detailed technical information. This can be particularly valuable for construction and HVAC projects where equipment must match engineering plans. Ide Pardazan Nakhl Mordab began its specialized heating and cooling production activities after several years of practical work and applied research in the building industry. In 2019, the company launched a production line focused on specialized and modern heating and cooling products. The company states that its goal is to develop practical products for the building and mechanical installation industry. Representatives are available in several Iranian cities, including Tehran, Isfahan, Mashhad, Zanjan, Urmia and Sari. How Should You Choose the Right Fan Coil for Your Project? Choosing the right fan coil should begin with identifying the technical requirements of the project rather than looking at price alone. Before purchasing, it is useful to determine: Room area and intended use Required cooling capacity Required heating capacity Available space above the ceiling Acceptable noise level Required control system Maintenance requirements Installation and connection conditions After these factors are identified, suitable models can be compared according to their technical specifications. A Practical Option for Space-Limited Projects In projects where suspended ceiling height is restricted, every centimeter of available installation space can matter. A ceiling fan coil with a height of approximately 130 mm can therefore be a practical option worth considering. The DC motor, low-noise design, washable filter and compatibility with modern control systems add further features to the compact construction. If you are planning to purchase a ceiling fan coil, first determine the technical requirements of your project and then evaluate the appropriate model based on its specifications. For detailed information about available models, capacities and purchasing conditions, you can contact Ide Pardazan Nakhl Mordab or its representatives. Frequently Asked Questions How much does a 130 mm ceiling fan coil cost? The final price depends on capacity, technical specifications, motor type, control features and current market conditions. The required model and capacity should be determined before requesting an exact price. Is a 130 mm fan coil suitable for suspended ceilings? Its low height can make it suitable for many projects with limited ceiling space. However, sufficient room for connections and maintenance must also be provided. Does the 130 mm ceiling fan coil use a DC motor? Yes. A DC motor is one of the stated specifications of this product. Does the fan coil have a washable filter? Yes. The unit is equipped with a washable filter, which can simplify routine maintenance. Can the fan coil be connected to a wall thermostat? Yes. The product supports connection to a Cyperus wall thermostat. Can the fan coil be controlled through an application? Yes. The unit supports connection to the dedicated Cyperus application. The available control functions depend on the specific system and configuration. What information is needed to purchase a ceiling fan coil? It is useful to know the room area and application, installation conditions, available ceiling height and required capacity. These details can help determine the appropriate model more accurately. For more information and free consultation, you can contact us. free consultation.