Choosing the right cooling and heating equipment plays an important role in indoor comfort and the overall efficiency of a building's HVAC system. Ceiling fan coil units are widely used in residential, commercial and office projects because of their compact design and suitability for installation above suspended ceilings. If you are looking to buy a ceiling fan coil in Tehran, Isfahan or Mashhad, it is important to consider more than the purchase price. Capacity, dimensions, motor type, noise level, filter design and control options can all affect the suitability of a unit for a specific project. What Is a Ceiling Fan Coil Unit? A ceiling fan coil unit is part of an HVAC system designed to distribute conditioned air throughout a room or building. Depending on the system design, the unit can provide cooling or heating through the circulation of air over the appropriate heat-exchange components. One of the important features of low-profile ceiling fan coils is their compact height. The model described here has a height of 130 mm, making it suitable for projects where the available ceiling space is limited. Specifications of the Slim Ceiling Fan Coil Based on the provided product information, this ceiling fan coil has been designed with an emphasis on compact dimensions, practical installation and convenient operation. Key specifications include: Height: 130 mm Width: 636 mm DC motor Low-noise operation Washable filter Durable galvanized steel body Compatibility with the Cyperus personal application Compatibility with a Cyperus wall thermostat Available capacities: 200, 300, 400 and 600 The availability of different capacities makes it possible to select a model according to the requirements of a specific room or building. Ceiling Fan Coil Models 200, 300, 400 and 600 Capacity is one of the most important factors when selecting a fan coil. This series is available in four capacity options: 200, 300, 400 and 600. The correct capacity cannot always be determined only by considering the floor area. Climate, building insulation, occupancy, window surfaces, internal heat sources and the intended use of the space can also affect the required cooling and heating capacity. For this reason, selecting a fan coil solely based on room size may not provide an accurate result. A proper HVAC calculation is recommended for projects where precise performance is required. Ceiling Fan Coil Dimensions The dimensions of HVAC equipment should be checked before installation, particularly when the unit is designed to be installed above a suspended ceiling. The specified model has a height of 130 mm and a width of 636 mm. Depending on the selected capacity, the length is approximately 443, 610, 946 or 1228 mm. Before ordering, it is important to check the available ceiling space, pipe connections, air distribution requirements and access needed for future maintenance. Main Advantages of a Low-Profile Ceiling Fan Coil The compact design of this type of fan coil can be useful in projects where installation space is limited. Compact Design With a height of 130 mm, the unit can be considered for installations where ceiling space is restricted. DC Motor The use of a DC motor is one of the specified technical features of this fan coil series. Low-Noise Operation Low-noise operation can be particularly valuable in offices, residential buildings and commercial spaces where acoustic comfort is important. Washable Filter A washable filter makes routine maintenance easier and can help maintain the airflow performance of the unit when properly cleaned. Galvanized Steel Body The galvanized body provides a durable structure and is designed for use as part of building HVAC systems. Fan Coil Representatives in Tehran, Isfahan and Mashhad Idea Pardazan Nakhl Mordab began its specialized production activities in the heating and cooling industry in 2019 after several years of activity and applied research in the construction sector. According to the provided company information, representatives are available in Tehran, Isfahan, Mashhad, Zanjan, Urmia and Sari. Local representatives can make it easier for customers and project managers to obtain product information and evaluate equipment based on the requirements of their specific HVAC projects. Where Can Ceiling Fan Coils Be Used? Ceiling fan coil units can be used in a variety of building projects, provided that the selected model matches the technical requirements of the HVAC system. Typical applications may include: Residential buildings Office spaces Commercial properties Multi-story buildings Renovation projects Buildings with limited ceiling space Projects requiring compact HVAC equipment However, the type of building is only one factor in the selection process. Thermal load, required airflow, available installation space and system design should also be evaluated. What Should You Check Before Buying a Ceiling Fan Coil? Before purchasing a ceiling fan coil, consider the following points: Required cooling and heating capacity Available installation space Suspended ceiling height Acceptable noise level Motor type Body material Filter design Available control options Maintenance requirements Building type and intended application Considering these factors can help you select equipment that fits both the technical requirements and the physical conditions of the project. What Affects the Price of a Ceiling Fan Coil? The price of a ceiling fan coil can vary depending on several technical and commercial factors. Capacity, dimensions, motor technology, control functions and construction specifications can all influence the final price. Therefore, comparing fan coils based only on their initial purchase cost may not provide a complete picture. Installation requirements, maintenance, energy efficiency and compatibility with the existing HVAC system should also be considered. Why Is Correct Capacity Selection Important? Selecting the correct capacity is essential for maintaining suitable indoor conditions. A fan coil with insufficient capacity may not provide the required cooling or heating performance during peak conditions. On the other hand, choosing equipment without considering the actual load can result in an inefficient HVAC design. For larger or more technically demanding projects, calculating the building's thermal load before purchasing the equipment is recommended. Final Considerations The slim ceiling fan coil described here combines a 130 mm height with a DC motor, washable filter, galvanized body and options for connection to Cyperus control systems. The series is available in 200, 300, 400 and 600 capacity options, while representatives are listed in Tehran, Isfahan, Mashhad, Zanjan, Urmia and Sari. If you are planning to buy a ceiling fan coil, start by determining the required capacity, available installation dimensions and HVAC requirements of the building. For detailed information about models, specifications, pricing and ordering, contact the company or its representative in your city. Frequently Asked Questions What is the height of the slim ceiling fan coil? The specified model has a height of 130 mm. Which capacities are available? The series is available in 200, 300, 400 and 600 capacity options. Are representatives available in Tehran and Isfahan? Yes. Tehran and Isfahan are among the cities listed as having company representatives. Mashhad, Zanjan, Urmia and Sari are also included. Does the fan coil have a washable filter? Yes. A washable filter is listed among the product's specifications. What are the dimensions of the ceiling fan coil? The specified width is 636 mm and the height is 130 mm. The length varies by model and is approximately 443, 610, 946 or 1228 mm. How should I choose the right fan coil capacity? Capacity depends on factors such as room size, climate, insulation, occupancy, building use and overall thermal load. For accurate selection, consultation with an HVAC professional is recommended. For more information and free consultation, you can contact us. free consultation.